New Opel Corsa ecoFLEX

The new Opel Corsa ecoFLEX is more respectful of the environment and fun to drive than ever. It is powered by a sophisticated, 70 kW/95 hp 1.3 CDTI diesel engine boosted by a turbo with a variable geometry. It is packed with 28 percent more power than the previous generation Corsa ecoFLEX even though fuel consumption and CO2 emissions are slashed by some 10 percent – yet the price is the same as the standard 90 hp Corsa 1.3 CDTI.

The new Corsa ecoFLEX illustrates Opel’s philosophy of developing ecologically responsible cars that are still fun to drive. With its 190 Nm of torque available between 1750 and 3250 rpm, this Corsa ecoFLEX needs only 3.7 l/100 km, releasing just 98 g/km CO2 as a three-door. The five-door Corsa emits 99 g/km.


Both versions are equipped with a standard Diesel Particulate Filter which dramatically reduces the emissions that are the most detrimental to health. With this Corsa ecoFLEX, fleet and private drivers in many European countries may benefit from special eco tax advantages without polluting the air with diesel particulates.

Also, the new Corsa ecoFLEX can be ordered with a variety of equipment variants. This means that customers have the choice of which trim and equipment they would like in their car, from the starter level up to optimized Cosmo variant.


The engine of the new Corsa ecoFLEX combines two strengths: low CO2 and high performance. Opel engineers achieved this by using a turbo with variable turbine geometry, which significantly improves the engine’s performance. To support the higher turbo pressure, engineers slightly reduced the compression ratio from 18 to 16.8: 1. Opel engineers optimized the calibration on the engine; they greatly increased low-end torque and the peak power, making a new transmission set-up possible: A longer transmission gear ratio was selected for the five-speed unit. The new 95 hp has a top speed of 177 km/h and needs only 12.3 seconds to reach 100 km/h from a standstill. This ‘’wide ratio, eco-friendly ‘’ gear set work together to lower CO2 values below 100g.

Aerodynamics has been improved by lowering the car by 20 mm and optimizing the air flows via the air intakes. Wheels are fitted with newly designed, more efficient wheel caps. The Corsa ecoFLEX is equipped with special, 175/70 tires that are roll-resistance-optimized and fitted to lighter, flow formed , 14” steel wheels – 15” wheels are optional.

2009 SEMA; Suzuki Kizashi Tuned to the Max

While the Concept Kizashi series debuted globally over the past two years, (in Frankfurt, Tokyo and New York), U.S. anticipation for the production Kizashi was met by a number of custom builders - and members of Suzuki management - asking the proverbial "what if?" What if you melded Kizashi's production underpinnings and artfully-crafted sheet metal with modifications fully appropriate to a concept's debut? With European sport sedans serving as Kizashi's inspiration, and Suzuki's design and engineering team constructing a platform fully appropriate to a global marketplace, the all-new Kizashi serves as the perfect platform for those stylistic and performance mods integral to America's motoring DNA. The challenge went out and four custom shops responded. The results of those combined efforts are on display next week at the 2009 Specialty Equipment Market Association (SEMA) Show.



Road Race Motorsport's Platinum Edition Kizashi
As one of the first custom builders to recognize the potential of Suzuki's vehicles, the presence of Road Race at SEMA comes as no surprise. Given the Kizashi platform's promise - and the fluid, almost organic sheet metal clothing it - Road Race supplies its own very unique take on Kizashi.
SEMA visitors can enjoy Road Race's Sport Body kit exterior which employs Carbontrix custom bumpers, rear spats and diffuser. Road Race has crafted a custom grill, vented hood and made the Kizashi its own 'Platinum Edition' graphics and a blackened roof. These visual modifications are supported by a platform perfectly suited to Las Vegas Motor Speedway or a high-speed drive on I-15 (what happens in Vegas doesn't have to stay in Vegas...).
Progress Technology provided the sport springs and front and rear sway bars. Road Race installed its own chassis stiffeners, and Rotora brings the custom Kizashi to a stop with 330mm slotted rotors up front, supplemented by Road Race's own 260mm slotted rotors in the rear. Under the vented hood, the sweetness continues with a proprietary custom intake system, Zeitronix ZT-2 data logging system and Road Race engine management. The modifications are concealed - until ignition - by a painted-to-match engine cover, and announced by Road Race's own 'Integrated Sport' dual exhaust system. The Road Race Kizashi can be seen at the Zeitronix Booth #21212.



Delta Tech Engineering Kizashi
Delta Tech Engineering, a specialist in vehicle lighting, started with a gutted - and lightened - Kizashi body shell. While Delta Tech took care of under the hood, with cold air intake and performance exhausts, RK Sport developed a body kit, Katzkin supplied the custom seating, and Koni enhanced the Kizashi's already composed ride with its own coilovers and shocks. Lighting, engineered in house by Delta Tech, is LED and HID. Sound equipment upgrades are provided by Kenwood. The Delta Tech Kizashi may be seen at Booth #23526 in the Central Hall.



Westside Auto Group Kizashi Soleil
Integrating vintage European elegance with the high-performance DNA of Suzuki's Hayabusa, Westside Group's Kizashi Soleil (French for 'masculine sun') incorporates numerous distinct touches, all executed to make an individualistic statement within the unique template supplied by Suzuki's own execution. Vehicle modifications performed by Westside include custom two-toned paint (Napa Merlot/Bronzed Amber), redesigned front and rear fenders, custom air apertures, fabricated grill, shaved and modified door handles and new front fascia. In back, a redesigned rear deck lid equipped with a GT Super Car spoiler, and a redesigned rear bumper is equipped with custom Yoshimura exhaust. Planting the Soleil to the ground are early-release Bridgestone Potenza mounted on R-Worx 7-spoke wheels. The Westside Group Kizashi will be on display in the show car area adjacent to the Las Vegas Convention Center.



Import Tuner Kizashi
No outlet speaks better to the 'tuner' audience than Import Tuner magazine. With its Kizashi the project build team went for the vehicular jugular, with performance enhancements under the hood, appropriate suspension mods connecting those enhancements to the ground, and cosmetic modifications to provide the appropriate visualization for Import Tuner's own editorial visualization.
With a nod to both the SEMA Show and its own Los Angeles - based roots, the Import Tuner Kizashi provides a tune-up to an already class-leading sport sedan. The Import Tuner Kizashi will be on display in the show car area adjacent to the Las Vegas Convention Center.



ICON Vehicle Dynamics Equator
Using Suzuki's award-winning Equator platform as its base, ICON Vehicle Dynamics taps into a variety of Southern California-based suppliers to assemble a more aggressive interpretation of Suzuki's off-road recipe. Under the hood, Doug Thorley long-tube headers and cat-back exhaust amplify the Equator's class-leading 4.0 liter V6. And for off-road exploration, the Equator's suspension is enhanced with ICON's own performance coilovers in front and 2.5-inch piggyback shocks supporting linked to Total Chaos upper control arms.
The enhanced power - and capability - is connected to the less-traveled path with Goodyear Wrangler MT/R tires mounted to Trail Ready bead-lock wheels; the Equator's bodywork is protected by Bushwacker fender flares. AMP Research bed extender and LightForce lights add to both utility and safety. ICON's Equator can be seen at SEMA booth #32173.



About Suzuki
The Brea, Calif.,-based Operations of American Suzuki Motor Corporation (ASMC) was founded in 1963 by parent company Suzuki Motor Corporation (SMC) and currently markets its vehicles in the United States through a network of approximately 350 automotive dealerships and numerous other motorcycle, ATV and marine distributors in 49 states. With global headquarters in Hamamatsu, Japan, SMC is a diversified worldwide automobile, motorcycle, and outboard motor manufacturer. In 2008, SMC sold more than 2 million new cars and trucks and more than 3.5 million motorcycles and ATVs. Founded in 1909 and incorporated in 1920, SMC has operations in 196 countries and regions. For more information, visit www.media.suzuki.com.
via:carscoop

BMW builds an M5 CSL

Celebrating 25 years of M5, BMW reveals today at Nurburgring an one-off BMW M5 CSL. Our german editor Benny is on-site and will report more news in the next few hours.
BMW’s Motorsport division buils a special lightweight version of the current E60 M5. The car is being described by M division’s head of development, Albert Biermann, as “the M5 CSL we never built”.


The transformation began with a modified version of the standard M5's 5.0-liter V10, which has been stroked to 5.5-liters and fitted with a carbon fiber intake, secondary oil cooler and a new fascia. BMW remains mum on official power figures, but Biermann says the mods are good for around 580 hp and 400 lb.-ft. of torque over the standard 507 hp engine.


BMW’s M division has also stripped down the interior, doing away with the standard front seats in favour of two carbon fibre backed pews, while the rear seat has been ditched altogether.
via:bmwblog

Bugatti Veyron Grand Sport 2009

Bugatti Veyron Grand Sport 2009

SEMA Show; '34 Ford EcoBoost hot rod project

DEARBORN, Mich., Oct. 28, 2009 – Hot rodders have always lived by the motto "There's no replacement for displacement," indicating that the more cubic inches an engine has, the better the resulting performance. Ford Powertrain and Detroit Street Rods are out to prove that thinking out-of-date with their EcoBoost™-powered '34 Ford hot rod.

To be introduced at this year's Specialty Equipment Market Association (SEMA) show, the Ford hot rod will be the "first" rear-wheel-drive application of the 3.5-liter twin-turbo EcoBoost V-6 delivering an estimated 400 horsepower and 400 ft.-lb. of torque – power numbers that easily rival a typical hot rod's 302-cubic-inch V-8 or even a modern-day V-8 of similar size.

"EcoBoost technology shows that there is a viable replacement for displacement," said Dan Kapp, director of Ford Powertrain Research and Advanced Engineering, who will be part of a SEMA "Driving Green" technology briefing panel discussion during the show. "As consumers' demand for fuel efficiency continues to grow, and our commitment to delivering best-in-class fuel economy remains steadfast, it's important to show that performance does not need to suffer as a result."


"Hot rod builds provide blank canvases for SEMA member companies and SEMA is uniquely positioned to demonstrate that horsepower and green power can coexist without sacrificing performance or the cool factor," said John Waraniak, SEMA vice president of Vehicle Technology. "This '34 EcoBoost hot rod is a fantastic example of modern green technology being applied in a manner that any performance enthusiast would love."

The EcoBoost family of engines uses turbocharging and direct injection technology to deliver up to 20 percent better fuel economy and up to 15 percent fewer CO2 emissions versus larger-displacement engines.

"The beauty of EcoBoost is that it enables us to downsize for fuel efficiency, yet boost for power," said Kapp. "We're able to decrease the size of the available engine – such as installing a V-6 versus a V-8 – yet boost the power using turbocharging to deliver similar power and torque to that larger engine."

The first EcoBoost engine, a 3.5-liter twin-turbo V-6, launched this year on the 2010 Ford Taurus SHO and Flex and on the Lincoln MKS and Lincoln MKT. The EcoBoost V-6 produces 355 horsepower (365 hp in the Taurus SHO) and 350 ft.-lb. of torque.

Ford has recently announced the first four-cylinder EcoBoost engines, launching in global applications beginning next year. The 1.6-liter EcoBoost I-4 first arrives in Europe, followed by the 2.0-liter EcoBoost I-4 launching on products in both Europe and North America.


Going forward, Ford will shift its powertrain strategy to be built around EcoBoost technology. Under the new system:

* A 3.5-liter EcoBoost V-6 would replace naturally aspirated V-8 engines
* A 2.0-liter EcoBoost I-4 would replace naturally aspirated V-6 engines
* A 1.6-liter EcoBoost I-4 would replace naturally aspirated large I-4 engines

Following the launches of the new EcoBoost I-4s will be the extension of the 3.5-liter V-6 to the first rear-wheel-drive configuration in the F-150 pickup truck late next year. Another global application, the Ford Falcon sedan in Australia, will receive a rear-wheel-drive version of the 2.0-liter EcoBoost I-4 in 2011.

The fun-to-drive nature of EcoBoost engines is leading Ford to introduce these fuel-saving powertrains in large volumes virtually across its lineup. For example, by 2013 more than 90 percent of Ford's North American lineup will be available with EcoBoost technology, and nearly 80 percent of Ford's global nameplates will have an available EcoBoost option.

By 2013, global EcoBoost volume throughout the Ford, Lincoln and Mercury vehicle family is expected to be 1.3 million units, with up to 750,000 sales coming from North America alone.


'34 Ford EcoBoost hot rod project
Detroit Street Rods' latest build is a 1934 Ford and is a joint venture with Ford Motor Company and Experi-metal. In this '34 application, the EcoBoost engine is configured for rear-wheel drive and is coupled with a Tremec five-speed manual transmission.

"The decision to use the EcoBoost engine for our powertrain on this project was an easy one in that it gave us the opportunity to combine the iconic '34 Ford sculpted body lines with the advanced technology of the EcoBoost powerplant," stated Robert Smith, president of Detroit Street Rods. "The result is the perfect hot rod marriage of advanced technology for power and legendary automobile design."

While the stock Honeywell turbochargers that drive the EcoBoost engine are used, they were repackaged to fit the engine bay of this all-steel replica body. The engine configuration and turbocharger packaging was dynamometer tested by Ford Powertrain for proper calibration of the engine electronic control module (ECM). In addition to the all-stock engine, other components including the fuel pump, ECM, fuel pump module, fuel pump processor and drive-by-wire throttle were utilized in their original production configuration.

The body is from Steve's Auto Restoration and is the recently released 1934 Ford 3-Window coupe. The complete body and fenders are from brand-new tooling, and are designed, stamped and manufactured by Experi-metal in Sterling Heights, Mich. This "replica" '34 features all-steel construction, full fenders, running boards, electronic power windows, air conditioning and custom bumpers.

The engine was repackaged and fitted with an engine plate adapter to mate with an aluminum flywheel, performance clutch and a Tremec TKO five-speed transmission. The turbochargers were repositioned to the front of the cylinder heads and custom aluminum tubing was used to route the air from the custom air cleaner through the air-to-air intercooler. The exhaust gases are routed from the cylinder heads through coated headers, through the stock wastegates, and pass through large custom exhaust cones located outside the engine bay and just above the front fenders.

Subaru Coupe 216A Details

It’s well known that Subaru and Toyota have been in the same bed developing the FT-86 but one question that remains on everyone’s lips is how, if they are developing the same car, can the two be different? Well it’s emerged that Subaru has been busy waving their wand over the 086A/FT-86 and is going to bring some very Subaru style magic to the table.
Just as soon as the Toyota FT-86 was born and came to this world at the Tokyo Motor show, it’s bigger, badder twin brother is about to hit the stage.


The biggest news to come out of all this is that rumors of the car being turbo and all wheel drive are now in fact confirmed. However staff close to the Subaru development side of the project have revealed is that the first thing to differ will be the codes which the cars will be known by. While the version of the FT-86 to go on sale in Japan will be known by the code 086A and in the US and Europe as the 087A and 088A respectively, the Fuji Heavy Industries version will be branded as the 216A. This is to “clearly distinguish between the Toyota and Subaru version of the car”. Things get juicier from there though with the confirmation of what many have been suspecting all along. The car will be driven by a 2.0 liter turbo charged powerplant feeding power to all four wheels. This will either come in the flavor of a revised, lower power but more efficient 250ps and 34.0kg/m EJ20 from the Impreza 2.0 GT or the EJ20 Turbo from the current Impreza WRX STi pumping out 308ps and 43.0kg/m of torque. Our guess is the latter may well be used for an STi version of the car down the track. No pun intended.


Subaru will further distance the 216A from the FT-86 through signature styling elements (as presented in these artist renderings), longer and wider dimensions and an extra 100kg in weight. However, the closeness in actual wheelbase and overall length with the current hatch mean the two could share even more parts.

Pricing has been speculated at around ¥3 million (€22,267/ US$32,880) when launched in Japan in 2011.
via 7tune